JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path e1 unframed

path e1 unframed

Description: 

Creates and configures an unframed E1 signal on a channelized SONET or SDH interface. The no version deletes an unframed E1 interface from the path.

Syntax: 

[ no ] path pathChannel e1 tributaryIdentifier unframed

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Identifier for the tributary. See description for the path ds1|e1 command.

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.