JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds3 framing

path ds3 framing

Description: 

Configures the framing format for a DS3 signal. This command applies to a DS3 over channelized SONET interface. The no version restores the default value.

Syntax: 

path pathChannel ds3 ds3Channel framing framingType

no path pathChannel ds3 ds3Channel framing

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• ds3Channel—Number, in the range 1–3, that identifies the path
• framingType—Choose one of the following:

• c-bit—Default; specifies C-bit parity framing
• m23—Specifies M23 multiplexer framing

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.