JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds3 description

path ds3 description

Description: 

Assigns a text description or an alias to a DS3 signal. This command applies to a DS3 over channelized SONET/SDH interface. Use the show controllers sonet command to display the text description. The no version removes the description or alias.

Syntax: 

path pathChannel ds3 ds3Channel description name

no path pathChannel ds3 ds3Channel description

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• ds3Channel—Number, in the range 1–3, that identifies the path
• name—Text string or alias of up to 80 characters for the T3 over channelized SONET/SDH interface

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.