path ds3 clock source
Configures the transmit clock source for a DS3 signal. This command applies to a DS3 over channelized SONET interface. The no version restores the default value.
path pathChannel ds3 ds3Channel clock source { line | internal { module | chassis } }
no path pathChannel ds3 ds3Channel clock source
- pathChannel—Number, in the range 1–2147483648, that identifies the path
- ds3Channel—Number, in the range 1–3, that identifies the path
- line—Interface transmits data from a clock recovered from the line's receive data stream
- internal—Interface transmits data using its internal clock. You must specify one of the following for internal clocking:
- module—Internal clock is from the line module itself
- chassis—Internal clock is from the configured system clock
Controller Configuration
Command introduced before JUNOSe Release 7.1.0.