JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds3

path ds3

Description: 

Creates and configures a DS3 signal. This command applies to a DS3 over channelized SONET interface. If you do not specify whether or not the path should be channelized, the router creates a channelized path by default. The no version deletes a path.

Syntax: 

path pathChannel ds3 ds3Channel { [ channelized ] | unchannelized }

no path pathChannel ds3 ds3Channel

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• ds3Channel—Number, in the range 1–3, that identifies the path

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.