JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds1 remote-loopback

path ds1 remote-loopback

Description: 

Enables acceptance of remote loopback requests at the DS1/E1 over SONET/SDH VT layer on channelized SONET and SDH interfaces. The no version restores the factory default value, which is to reject remote loopback requests.

Syntax: 

[ no ] path pathChannel ds1 tributaryIdentifier remote-loopback

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Identifier for the tributary. See description for the path ds1|e1 command.

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.