JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds1|e1 snmp trap link-status

path ds1|e1 snmp trap link-status

Description: 

Enables SNMP link status processing for DS1 or E1 over channelized SONET and SDH interfaces. The no version disables SNMP link status processing.

Syntax: 

[ no ] path pathChannel { ds1 | e1 } tributaryIdentifier snmp trap link-status

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Identifier for the tributary. See description for the path ds1|e1 command.

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.