JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds1|e1 framing

path ds1|e1 framing

Description: 

Configures the framing format for a DS1 or an E1 signal when DS1/E1 is configured over channelized SONET and SDH interfaces. The no version restores the default value.

Syntax: 

path pathChannel { ds1 | e1 } tributaryIdentifier framing framingType

no path pathChannel { ds1 | e1 } tributaryIdentifier framing

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Identifier for the tributary. See description for the path ds1|e1 command.
• framingType—One of the following types:

• crc4—Cyclic redundancy check (default for E1); not available for T1
• no-crc4—No cyclic redundancy check; not available for T1
• esf—Extended superframe (T1 default); not available for E1
• sf—Superframe; not available for E1

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.