JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds1|e1 description

path ds1|e1 description

Description: 

Assigns a text description or an alias to a DS1 or an E1 signal. This command applies to a DS1/E1 over SONET/SDH VT layer on channelized SONET and SDH interfaces. Use the show controllers sonet command to display the text description. The no version removes the description or alias.

Syntax: 

path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ] description name

no path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ] description

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Identifier for the tributary; see the path ds1|e1 command description for details
• tributaryType—Virtual tributary type

• vt15—Default for SONET DS1 tributaries
• tu11—Default for SDH DS1 tributaries
• tu12—Default for SDH E1 tributaries

• name—Text string or alias of up to 80 characters for the T1/E1 over SONET/SDH VT layer on channelized SONET and SDH interfaces

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.