JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds1|e1 clock source

path ds1|e1 clock source

Description: 

Configures the transmit clock source for DS1 or E1 channels over channelized SONET and SDH interfaces. The no version restores the default value.

Syntax: 

path pathChannel { ds1 | e1 } tributaryIdentifier clock source
{ line | internal { module | chassis } }

no path pathChannel { ds1 | e1 } tributaryIdentifier clock source

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Identifier for the tributary. See description for the path ds1|e1 command.
• line—Interface transmits data from a clock recovered from the line's receive data stream.
• internal—Interface transmits data using its internal clock. You must specify one of the following for internal clocking:

• module—Internal clock is from the line module itself
• chassis—Internal clock is from the configured system clock

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.