JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > rtr reaction-configuration path-change

rtr reaction-configuration path-change

Description: 

Enables path change reaction. When the type of RTR entry is echo, you cannot configure the path-change trap. There is no no version. See the no rtr reaction-configuration command.

Syntax: 

rtr reaction-configuration rtrIndex path-change

• rtrIndex—Number of the operation to be configured, in the range 1–4294967295; no default

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.