JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > rtr reaction-configuration action-type

rtr reaction-configuration action-type

Description: 

Sets certain actions to occur based on events under control of the RTR. The default is that traps of enabled events are taken. There is no no version. See the no rtr reaction-configuration command.

Syntax: 

rtr reaction-configuration rtrIndex [ action-type actionType ]

• rtrIndex—Number of the operation to be configured, in the range 1–4294967295
• actionType—One of the following types:

• none—No action; selecting this option clears all traps for the given operation
• trapOnly—Trap only action; this is the default; enabled events trigger the trap

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.