JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds1|e1 channel-group description

path ds1|e1 channel-group description

Description: 

Assigns a text description or an alias to a DS1 (T1) or an E1 channel group for channelized SONET and SDH interfaces. Use the show controllers sonet command to display the text description. The no version removes the description or alias.

Syntax: 

path pathChannel { ds1 | e1 } tributaryIdentifier
channel-group channelGroupNumber description name

no path pathChannel { ds1 | e1 } tributaryIdentifier
channel-group channelGroupNumber description

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Identifier for the tributary; see the path ds1|e1 command description for details
• channelGroupNumber—Either a fractional T1 interface in the range 1–24 or a fractional E1 interface in the range 1–31
• name—Text string or alias of up to 80 characters for the DS1 or E1 channel group for channelized SONET and SDH interfaces

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.