JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds1|e1

path ds1|e1

Description: 

Creates and configures SONET and SDH tributaries. The no version deletes a tributary.

Syntax: 

path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ]

[ no ] path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ]

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Specifier for the tributary in the format
  pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber

• pathPayload—Payload number for the path; value is 1 for SONET and in the range 1–3 for SDH
• tributaryGroup—Number, in the range 1–7, that identifies the group within the path
• tributaryNumber—Number of the tributary within the tributary group; the value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary type is tu12

• tributaryType—Virtual tributary type

• vt15—Default for SONET DS1 tributaries
• tu11—Default for SDH DS1 tributaries
• tu12—Default for SDH E1 tributaries

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.