JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > redistribute isis

redistribute isis

Description: 

Redistributes IPv6 routes from one IS-IS routing level into the other. The no version ends the redistribution.

Syntax: 

[ no] redistribute isis from { level-1 into level-2 | level-2 into level-1 }
route-map mapTag

• level-1—Specifies the redistribution of routes from or into IS-IS level 1
• level-2—Specifies the redistribution of routes from or into IS-IS level 2
• mapTag—String of up to 32 alphanumeric characters specifying the route map applied to all routes from the source protocol; if you do not specify a route map, all routes are redistributed

Mode(s): 

Address Family Configuration

Release Information: 

Command introduced in JUNOSe Release 8.2.0.