JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > radius connect-info-format

radius connect-info-format

Description: 

Specifies the format of RADIUS attribute 77, Connect-Info, on the LNS. The format uses the received L2TP connect-speed AVPs that the LAC sends to the LNS. The no version restores the default, in which the LNS does not generate the Connect-Info attribute.

Syntax: 

radius connect-info-format { l2tp-connect-speed | l2tp-connect-speed-rx-when-equal }

no radius connect-info-format

• l2tp-connect-speed—Specifies that the Connect-Info attribute include only the RX speed when the RX speed is different from the TX speed and is greater than zero.
• l2tp-connect-speed-rx-when-equal—Specifies that the Connect-Info attribute always include the RX speed when the speed is greater than zero.

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.