JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > profile atm1483 bulk-config-name pvc

profile atm1483 bulk-config-name pvc

Description: 

Assigns an overriding profile to a single ATM PVC that exists within a VC subrange previously configured with the atm bulk-config command. The profile atm1483 bulk-config-name pvc command enables you to troubleshoot the specified PVC by overriding the currently assigned base profile with one that has debugging attributes enabled. After the overriding profile is assigned, it is used instead of the previously assigned base profile to create any ATM 1483 dynamic subinterface columns over the specified PVC. The no version removes the overriding profile assignment for the PVC and restores the original base profile assignment.

Syntax: 

profile atm1483 bulk-config-name bulkConfigName pvc vpi vci overrideProfileName

no profile atm1483 bulk-config-name bulkConfigName pvc vpi vci

• bulkConfigName—Name associated with the VC range configured for use by a dynamic ATM 1483 subinterface, as specified in the atm bulk-config command
• vpi—Virtual path identifier of the PVC; must exist between the starting VPI value and ending VPI value of a bulk-configured VC subrange
• vci—Virtual circuit identifier of the PVC; must exist between the starting VCI value and ending VCI value of a bulk-configured VC subrange
• overrideProfileName—Name of the profile that overrides the previously assigned base profile for the specified ATM PVC

Mode(s): 

Interface Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.