JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > pppoe profile

pppoe profile

Description: 

Assigns a profile to a static PPPoE major interface. The profile configuration is used to dynamically configure an upper bridged Ethernet, IP, PPP, and/or PPPoE interface. The no version removes the profile assignment from the interface.

Syntax: 

[ no ] pppoe profile [ bridgedEthernet | ip | ppp | pppoe | any ] profileName

• bridgedEthernet—Specifies a bridged Ethernet encapsulation type to which the profile applies
• ip—Specifies an IP encapsulation type to which the profile applies
• ppp—Specifies a PPP encapsulation type to which the profile applies
• pppoe—Specifies a PPPoE encapsulation type to which the profile applies
• any—Specifies any autoconfigured encapsulation that does not have a specific profile assignment
• profileName—Profile name of up to 80 characters

Mode(s): 

Interface Configuration, Subinterface Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.