JUNOSe 9.1.x Command Reference Guide N to Z > N Commands > ntp broadcast

ntp broadcast

Description: 

Enables NTP broadcast server on a server interface to transmit NTP broadcast packets periodically. You can enable up to 100 NTP broadcast server interfaces. The no version prevents the interface from sending NTP broadcast packets.

Syntax: 

[ no ] ntp broadcast [ version number ] [ pollInterval ]

• number—Integer in the range 1–4; indicates the version of the NTP software on the NTP broadcast server; default value is 3
• pollInterval—Integer in the range 4–17; specifies the poll interval in seconds (as a power of 2) for broadcasting NTP messages; default value is 6 (64 seconds)

Mode(s): 

Interface Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.