JUNOSe 9.1.x Command Reference Guide N to Z > N Commands > next-interface

next-interface

Description: 

Defines an output interface for an IP policy list. When the interfaceType is a broadcast medium, specify a next hop using the next-hop command. The no version removes a next interface rule from a policy list; the suspend keyword temporarily suspends the rule; the no suspend version resumes application of a suspended rule. For IP interfaces, this command is supported only on input policies.

NOTE: The next-interface command has been replaced by the forward interface command and may be removed completely in a future release. The SRP module Fast Ethernet port cannot be the destination of the next-interface command.

Syntax: 

[ no ] [ suspend ] next-interface interfaceType interfaceSpecifier
[ next-hop nextHop ] [ classifier-group claclName ] [ precedence precValue ]

• interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• nextHop—Next-hop IP address
• claclName—In Policy List Configuration, specifies the classifier control list used to classify packets for this next-hop policy. If you do not specify a classifier group, the router selects all packets from the interface associated with this policy list for this rule.
• precValue—In Policy List Configuration, specifies the precedence of this rule in relation to other rules within this set

Mode(s): 

Classifier Group Configuration, Policy List Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.

    Related Topics    

• Policy Rule Precedence