JUNOSe 9.1.x Command Reference Guide N to Z > N Commands > net

net

Description: 

Configures an IS-IS network entity title for the specified routing process. The no version removes a specific NET. You must specify a NET. You can add multiple manual area IDs by adding multiple NETs with the same system ID. The last NET cannot be removed.

Syntax: 

[ no ] net networkEntityTitle

• networkEntityTitle—NET that specifies the area ID and the system ID for an IS-IS routing process; can be either an address or a name; in the form of: areaID.systemID.nSelector
  For example:
  

• areaID—All bytes in front of the system ID; the number of bytes can vary from 1–13 bytes
• systemID—Always 6 bytes and cannot vary
• nSelector—Last byte; always 0

Mode(s): 

Router Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.