JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mpls copy-upc-to-exp

mpls copy-upc-to-exp

Description: 

Sets the initial value of the EXP bits in pushed or swapped labels to the user packet class value associated with the packets. This command does not modify EXP bits in labels already in the received MPLS packet. The no version restores the default condition, where the EXP bits are set to zero (for non-MPLS/IP traffic) or to the IP precedence value from the TOS field of the IP packet header (for IP traffic).

Syntax: 

[ no ] mpls copy-upc-to-exp

Mode(s): 

Global Configuration

    Release Information    Command introduced in JUNOSe Release 7.1.0.