JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mpls atm vpi range

mpls atm vpi range

Description: 

Specifies the range for virtual path identifiers that can be used in MPLS labels for an MPLS major interface on an ATM AAL5 interface using the interface label space. Creates the MPLS major interface if it does not yet exist. An error message is generated if you issue the command for any other layer 2 interface, as they do not support the interface label space. The no version deletes the range.

Syntax: 

mpls atm vpi range minVPI maxVPI

no mpls atm vpi range

• minVPI—Lowest virtual path identifier acceptable for a label, a value in the range 0–255
• maxVPI—Highest virtual path identifier acceptable for a label, a value in the range 0–255

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.