JUNOSe 9.1.x Command Reference Guide A to M > M Commands > monitor vlan interface

monitor vlan interface

Description: 

Displays bit rate and packet rate statistics over a specified time interval for one or more VLAN subinterfaces. There is no no version.

Syntax: 

monitor vlan interface interfaceType interfaceSpecifier
[ interfaceType interfaceSpecifier ]* [ load-interval seconds ] [ display-time-of-day ]

• interfaceType—One of the following interface types listed in Interface Types and Specifiers in About This Guide

• atm
• fastEthernet
• gigabitEthernet
• lag
• tenGigabitEthernet

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• seconds—Number of seconds in the range 5–30 that specifies the time interval at which the router calculates bit rates and packet rates for the specified VLAN; default value is 5 seconds
• display-time-of-day—Sets time at which the router calculates the bit rate and packet rate statistics for the current interval
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line

Mode(s): 

Privileged Exec, User Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.