JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mark

mark

Description: 

Sets the precedence field of the ToS byte (for IPv4) or traffic class byte (for IPv6) in the IP header to a specified value for packets that match the current classifier control list. This command is not tied to a rate limit profile, but marks packets based on a classifier control list. The no version removes the mark rule from the policy list; the suspend version temporarily suspends the mark rule; the no suspend version resumes application of a suspended rule.

NOTE: This command replaces the Policy List Configuration mode version of the mark command, which may be removed completely in a future release.

Syntax: 

For IPv4:

[ no ] [ suspend ] mark { tosByteValue mask maskValue |
tos-precedence tosPrecNum | tos tosNum | dsfield dsFieldNum }
profile colorMarkProfileName }

• tosByteValue—ToS byte value to be assigned to packets; in the range 0–255
• maskValue—Mask to be used when applying ToS byte values to packets; in the range 1–255
• tosPrecNum—ToS precedence value to be assigned to packets; in the range 0–7
• tosNum—ToS value to be assigned to packets; in the range 0–255
• dsFieldNum—DS field value to be assigned to packets; in the range 0–63
• colorMarkProfileName—Name of the color-mark profile (up to 40 alphanumeric characters)

For IPv6:

[ no ] [ suspend ] mark { tcByteValue mask maskValue | tc-precedence tcPrecNum |
tcfield tcFieldNum | dsfield dsFieldNum } profile colorMarkProfileName }

• tcByteValue—Traffic class field value to be assigned to packets; in the range 0–255
• maskValue—Mask to be used when applying traffic class field values to packets; in the range 1–255
• tcPrecNum—Traffic class field precedence value to be assigned to packets; in the range 0–7
• tcFieldNum—Traffic class field value to be assigned to packets; in the range 0–255
• dsFieldNum—DS field value to be assigned to packets; in the range 0–63
• colorMarkProfileName—Name of the color-mark profile (up to 40 alphanumeric characters)

Mode(s): 

Classifier Group Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.
colorMarkProfileName variable added in JUNOSe Release 7.2.0.

    Related Topics    

• Policy Rule Precedence