JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mirror

mirror

Description: 

Enables packet mirroring based on the specified trigger and specifies the secure policy to attach to the subscriber's interface. The no version disables packet mirroring for the subscriber and removes the trigger configuration.

Syntax: 

mirror triggerType triggerValue { ip | l2tp } secure-policy-list policyName

no mirror triggerType triggerValue { ip | l2tp }

• triggerType—One of the following RADIUS attributes

• acct-session-id—Acct-Session-ID (RADIUS attribute 44)
• calling-station-id—Calling-Station-ID (RADIUS attribute 31)
• ip-address—Framed-IP-Address (RADIUS attribute 8)
• nas-port-id—NAS-Port-ID (RADIUS attribute 87)
• username—User-Name (RADIUS attribute 1)

• triggerValue—Value of the triggerType (the specified RADIUS attribute) that identifies the subscriber
• ip—Configures mirroring for an IP subscriber
• l2tp—Configures mirroring for an L2TP subscriber
• policyName—Secure policy to attach to the subscriber's interface

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.
nas-port-id keyword added in JUNOSe Release 7.1.0.

    Related Topics    

• Configuring CLI-Based Mirroring