JUNOSe 9.1.x Command Reference Guide A to M > M Commands > metric

metric

Description: 

Sets the metric to the same value for all active IS-IS IPv4 and IPv6 interfaces at the specified level. If you do not specify level 1 routers or level 2 routers, then the metric is applied to both level 1 and level 2 routers. The no version restores the individual default value, 10.

Syntax: 

metric globalDefault [ level-1 | level-2 ]

no metric [ level-1 | level-2 ]

• globalDefault—Metric used for all IS-IS interfaces; a number in the range 1–16777215; overridden by the isis metric command
• level-1—Configuration applies only to level 1 routing
• level-2—Configuration applies only to level 2 routing

Mode(s): 

Router Configuration

    Release Information    Command introduced in JUNOSe Release 9.0.0.