JUNOSe 9.1.x Command Reference Guide A to M > M Commands > member-interface

member-interface

Description: 

Adds a member interface, also known as a bundle member, to an MLPPP bundle, an MLFR bundle, or an IEEE 802.3ad link aggregation group (LAG) bundle. The no version removes the specified member interface from the bundle.

Syntax: 

[ no ] member-interface interfaceType interfaceSpecifier

• interfaceType—One of the following interface types listed in Interface Types and Specifiers in About This Guide

• serial (MLFR bundle or MLPPP bundle)
• pos (MLFR bundle only)
• fastEthernet (IEEE 802.3ad LAG bundle only)
• gigabitEthernet (IEEE 802.3ad LAG bundle only)

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide

Mode(s): 

Interface Configuration, Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.