JUNOSe 9.1.x Command Reference Guide A to M > M Commands > member interface

member interface

Description: 

Adds a member VLAN or S-VLAN subinterface to a Martini layer 2 circuit associated with a load-balancing group. This command creates an MPLS shim interface and associates it with the group. The no version removes the member subinterface from the circuit. Repeat as needed to remove all member subinterfaces used by a load-balanced circuit, thereby deleting the circuit from the group.

Syntax: 

[ no ] member interface interfaceType interfaceSpecifier

• interfaceType—One of the following interface types listed in Interface Types and Specifiers in About This Guide

• serial
• pos

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide

Mode(s): 

L2 Transport Load-Balancing-Circuit Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.

    Related Topics    

• Configuring CE-Side Load Balancing for Martini Layer 2 Transport