JUNOSe 9.1.x Command Reference Guide A to M > M Commands > match route-type

match route-type

Description: 

Matches routes of the specified type. The no version removes the match clause from a route map unless you specify a value, in which case only that value is removed from the match clause.

Syntax: 

match route-type internal [ intra | inter ] [ level-1 | level-2 ]
[ external [ type-1 | type-2 ] ] [ level-1 | level-2 ]*

match route-type external [ type-1 | type-2 ] [ level-1 | level-2 ]
[ internal [ intra | inter ] ] [ level-1 | level-2 ]*

match route-type { level-1 | level-2 } [ internal [ intra | inter ] ]
[level-1 | level-2 ] [ external [ type-1 | type-2 ] ] [ level-1 | level-2 ]*

match route-type { level-1 | level-2 } [ external [ type-1 | type-2 ] ]
[ level-1 | level-2 ] [ internal [ intra | inter ] ] [ level-1 | level-2 ]*

no match route-type [ internal [ intra | inter ] | external [ type-1 | type-2 ] |
level-1 | level-2 ]

• internal—Specifies internal routes

• intra—OSPF intra-area routes
• inter—OSPF interarea routes

• external—Specifies external routes

• type-1—OSPF type 1 external routes
• type-2—OSPF type 2 external routes

• level-1—Specifies IS-IS level 1 routes
• level-2—Specifies IS-IS level 2 routes
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line

Mode(s): 

Policy List Configuration, Route Map Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.