JUNOSe 9.1.x Command Reference Guide A to M > M Commands > match distance

match distance

Description: 

Matches any routes that have the specified administrative distance. The no version removes the match clause from a route map unless you specify a value, in which case only that value is removed from the match clause.

NOTE: Matching a distance is useful only when applied to a route being redistributed out of a routing table. Distance is used to determine the relative preference between routes to the same prefix in order to pick the best route to that prefix in the routing table. Distance has no meaning in any other circumstance and any attempt to match distance will fail.

Syntax: 

match distance distance [ distance ]*

no match distance [ distance ]

• distance—Administrative distance in the range 0–255
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line

Mode(s): 

Policy List Configuration, Route Map Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.