JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mroute port admission-bandwidth-limit

mroute port admission-bandwidth-limit

Description: 

Configures a limit on the admission bandwidth of outgoing interfaces (OIFs) containing IPv4 or IPv6 mroutes, across different virtual routers, on a port. The no version removes any OIF admission bandwidth limits.

Syntax: 

mroute port portNumber admission-bandwidth-limit limitValue
[ priority-bandwidth-limit priorityBandwidthValue ] [ hysteresis hysteresisValue ]

no mroute port portNumber admission-bandwidth-limit

• portNumber—Port number in the form slot/port.
• limitValue—Limit on the admission bandwidth (in bits per second) of outgoing interfaces containing IPv4 or IPv6 mroutes, across different virtual routers, on a port. The default is no limit.
• priorityBandwidthValue— Minimum value of admitted priority bandwidth in bps. The default is no limit.
• hysteresisValue—Minimum priority bandwidth limit before the system evaluates mroutes and admits any blocked OIFs; in the range 0-100 percent.

Mode(s): 

Global Configuration

    Release Information    Command introduced in JUNOSe Release 7.1.0.
hysteresis and priority-bandwidth limit keywords and hysteresisValue and priorityBandwidthValue variables added in JUNOSe Release 8.2.0.