JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mpls spf-use-any-best-path

mpls spf-use-any-best-path

Description: 

Enables the SPF calculations to consider both the best IGP (IS-IS or OSPF) paths and the MPLS tunnel to reach the tunnel endpoint. The no version restores the default value, which is to always use the MPLS tunnel to reach the tunnel endpoint—the IGP best paths are not considered.

Syntax: 

[ no ] mpls spf-use-any-best-path

Mode(s): 

Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.