JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mpls rsvp profile

mpls rsvp profile

Description: 

In Global Configuration mode, creates or modifies a configuration profile for RSVP-TE. Places the CLI in RSVP Profile Configuration mode. If you do not specify a profile name, the factory default profile is assumed. The no version deletes the specified profile.

In Interface Configuration mode, creates or enables RSVP-TE on the interface with the factory default profile or the specified profile, or disables RSVP-TE on the interface. The no version reverts to the default profile on the interface.

Syntax: 

In Global Configuration mode:

mpls rsvp [ interface ] profile [ profileName ]

no mpls rsvp interface profile profileName

In Interface Configuration mode:

mpls rsvp profile profileName

no mpls rsvp profile

• interface—Keyword required for the no version in Global Configuration mode
• profileName—Name of a profile to be created or modified (Global Configuration mode), applied to an interface (Interface Configuration mode), or deleted (both modes); the profile sets the values for the protocol parameters; until you modify the profile settings, the values match those of the implicit default profile

Mode(s): 

Global Configuration, Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.