JUNOSe 9.1.x Command Reference Guide A to M > J-K-L Commands > l2vpn control-word

l2vpn control-word

Description: 

Indicates that the local preference is to use the control word for the layer 2 packets encapsulated in the MPLS packets that are sent to the remote PE router. The no version indicates that the local preference is to not use the control word for the layer 2 packets encapsulated in the MPLS packets that are sent to the remote PE router. The default version accepts the preference determined by the interface stack on which the MPLS interface is stacked.

Syntax: 

[ no | default ] l2vpn l2VpnName control-word

• l2VpnName—Name of the L2VPN instance

Mode(s): 

Global Configuration

    Release Information    Command introduced in JUNOSe Release 8.1.0.

    Related Topics    

• Configuring an L2VPN Instance