JUNOSe 9.1.x Command Reference Guide A to M > J-K-L Commands > l2tp unlock-test destination

l2tp unlock-test destination

Description: 

Forces L2TP to disregard any remaining lockout time and immediately begin the lockout test procedure for the specified destination. If lockout testing is not enabled, this command immediately unlocks the destination. There is no no version.

Syntax: 

l2tp unlock-test destination { destinationName | [ virtual-router vrName ] ip ipAddress }

• destinationName—Name of the L2TP destination
• vrName—Name of the virtual router on which the destination exists
• ipAddress—IP address of the destination

Mode(s): 

Privileged Exec (at privilege level 10 or higher)

    Release Information    Command introduced in JUNOSe Release 7.2.0.