JUNOSe 9.1.x Command Reference Guide A to M > J-K-L Commands > l2tp unlock destination

l2tp unlock destination

Description: 

Forces L2TP to immediately unlock the specified L2TP destination and return the destination to the available state. Any remaining lockout time and the lockout test setting (if configured) are not taken into account. There is no no version.

Syntax: 

l2tp unlock destination { destinationName | [ virtual-router vrName ] ip ipAddress }

• destinationName—Name of the L2TP destination
• vrName—Name of the virtual router on which the destination exists
• ipAddress—IP address of the destination

Mode(s): 

Privileged Exec (at privilege level 10 or higher)

    Release Information    Command introduced in JUNOSe Release 7.2.0.