JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip dhcp-local auto-configure agent-circuit-identifier

ip dhcp-local auto-configure agent-circuit-identifier

Description: 

Configures the DHCP local server to support the creation of dynamic subscriber interfaces built over dynamic VLANs that are based on the agent-circuit-id option (suboption 1) of the option 82 field in DHCP messages. This command is specific to a virtual router. The no version disables the autoconfigure feature.

Syntax: 

[ no ] ip dhcp-local auto-configure agent-circuit-identifier

Mode(s): 

Global Configuration

    Release Information    Command introduced in JUNOSe Release 7.3.0.