JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip auto-detect ip-subscriber

ip auto-detect ip-subscriber

Description: 

Sets the router's packet detect feature, specifying that IP automatically detect packets that do not match any entries in the demultiplexer table. When an unmatched packet is detected, an event is generated that determines whether to create a dynamic subscriber interface or to configure an existing interface. The no version disables autodetection.

Syntax: 

[ no ] ip auto-detect ip-subscriber

Mode(s): 

Interface Configuration, Profile Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.