JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6 virtual-router

ipv6 virtual-router

Description: 

Specifies a virtual router in an IPv6 profile. Dynamic interfaces created with the profile are assigned to this VR. The no version removes the VR from the profile; if a VR is not specified via RADIUS, then any subsequent creation process for dynamic interfaces using the profile fails.

Syntax: 

[ no ] ipv6 virtual-router vrName

• vrName—Name of the virtual router; a string of 1–15 alphanumeric characters

Mode(s): 

Profile Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.