ipv6 rpf-route
Customizes static IPv6 routes that the router can use to verify source addresses in multicast packets. The no version removes the static route.
ipv6 rpf-route [ vrf vrfName ] ipv6Address/addressMask
{ nextHopIpv6Address | interfaceType interfaceSpecifier } [ distance ]no ipv6 rpf-route [ vrf vrfName ] ipv6Address/addressMask
[ nextHopIpv6Address | interfaceType interfaceSpecifier ] [ distance ]
- vrfName—Name of the VRF; string of 1–32 alphanumeric characters
- ipv6Address—IPv6 address of the destination network
- addressMask—Subnet mask for the destination network
- nextHopIpv6Address—IPv6 address of the next hop
- interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
- interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
- distance—Number in the range 0–255 that indicates the preference for this route
Global Configuration
Release Information Command introduced before JUNOSe Release 7.1.0.
vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.