JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6 route

ipv6 route

Description: 

Configures a static IPv6 prefix route. The no version removes a static IPv6 prefix route.

Syntax: 

ipv6 route [ vrf vrfName ] prefix { nextHop | interfaceType interfaceSpecifier } [ distance ]

no ipv6 route [ vrf vrfName ] prefix [ nextHop | interfaceType interfaceSpecifier ]
[ distance ]

• vrfName—Name of the VRF; string of 1–32 alphanumeric characters
• prefix—Combination of both a prefix and prefix length (mask) value. The prefix (IP address or network) defines the IPv6 interface or network. The prefix (mask) length of the IPv6 prefix is a decimal value that indicates how many of the high-order contiguous bits of the address comprise the prefix (the network portion of the address). A slash mark must precede the decimal value. An example of a prefix would be "7fff::0/16", "7fff::0/32", "7fff:2:3::0/24", or "7fff::1/128".
• nextHop—IPv6 address of the next-hop to reach the destination prefix (network). The next-hop address need not be directly connected; recursion locates the physical next-hop.
• interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• distance—Preference value for the IPv6 route. A default value of 1 gives static routes precedence over any other type of route (with the exception of connected routes).

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.
vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.