JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6 pim query-interval

ipv6 pim query-interval

Description: 

Specifies how often the router sends PIM router query messages from this interface. The no version specifies the default time interval, 30 seconds.

Syntax: 

ipv6 pim query-interval queryTime

no ipv6 pim query-interval

• queryTime—Interval in the range 0–210 seconds at which the router sends PIM router query messages from this interface

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.