JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6 ospf transmit-delay

ipv6 ospf transmit-delay

Description: 

Sets the estimated time it takes to transmit a link-state update packet on the interface. The no version restores the default value.

Syntax: 

ipv6 ospf [ processId ] transmit-delay transmDelay

no ipv6 ospf [ processId ] transmit-delay

• processId—Integer in the range 1–65535
• transmDelay—Link-state transmit delay, a number in the range 0–3600 seconds; default value is 1 second

Mode(s): 

Interface Configuration, Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.