JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6 ospf priority

ipv6 ospf priority

Description: 

Sets the router priority. Used in determining the designated router for the particular network. This designation applies only to multiaccess networks. Every broadcast and nonbroadcast multiaccess network has a designated router. The no version restores the default value.

Syntax: 

ipv6 ospf [ processId ] priority intfPriority

no ipv6 ospf [ processId ] priority

• processId—Integer in the range 1–65535
• intfPriority—Priority value, an 8-bit number in the range 1–255; default value is 1

Mode(s): 

Interface Configuration, Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.