JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6 ospf hello-interval

ipv6 ospf hello-interval

Description: 

Specifies the interval between hello packets that the router sends on the interface. The no version resets the hello interval to its default.

Syntax: 

ipv6 ospf [ processId ] hello-interval helloInterval

no ipv6 ospf [ processId ] hello-interval

• processId—Integer in the range 1–65535
• helloInterval—Number in the range 1–65535 seconds; default value is 10 seconds

Mode(s): 

Interface Configuration, Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.