JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6 ospf dead-interval

ipv6 ospf dead-interval

Description: 

Sets the time period during which the router's neighbors do not see hello packets before they declare the router to be down. The no version resets the dead interval to its default.

Syntax: 

ipv6 ospf [ processId ] dead-interval deadInterval

no ipv6 ospf [ processId ] dead-interval

• processId—Integer in the range 1–65535
• deadInterval—Number in the range 0–2147483647 seconds; default value is 40 seconds

Mode(s): 

Interface Configuration, Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.