JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6 ospf cost

ipv6 ospf cost

Description: 

Specifies a cost metric for an interface. Used in the calculation of the SPF routing table. The no version resets the path cost to the default.

Syntax: 

ipv6 ospf [ processId ] cost intfCost

no ipv6 ospf [ processId ] cost

• processId—Integer in the range 1–65535
• intfCost—Link-state metric cost; number in the range 0–65535; default value
  is 10

Mode(s): 

Interface Configuration, Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.