JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6

ipv6

Description: 

Enables an IPv6 instance on a router that does not already have an explicit IPv6 address. Normally, performing any IPv6 configuration automatically enables IPv6 on the interface. The no version disables IPv6 on the router.

NOTE: Disabling IPv6 on the router disables all IPv6 unicast routing protocols.

Syntax: 

[ no ] ipv6

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.