JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipsec clear sa

ipsec clear sa

Description: 

Refreshes ISAKMP/IKE or IPSec SAs. There is no no version.

Syntax: 

ipsec clear sa { all [ state tunnelState ] | tunnel tunnelName } [ phase { 1 | 2 } ]

• all—Reinitializes all SAs
• state—Reinitializes SAs on tunnels that are in a specific state
• tunnelState—State of tunnel, up, down, not-present
• tunnel—Specifies that an SA on a specific tunnel is to be reinitialized
• tunnelName—Name of tunnel
• phase—Specifies one of the following types of tunnel to be reinitialized:

• 1—ISAKMP/IKE tunnels
• 2—IPSec tunnels

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.